
Composite and timber fencing in Málaga, built from the ground up
We build composite and timber fences for villas, townhouses and gardens across Málaga province – setting out, footings, low wall, posts and boards, with one team responsible for the whole job.
A composite fence is a boundary fence whose boards are made of wood-plastic composite (WPC) – wood fibre bound in a thermoplastic – fixed between posts or pillars, usually on a concrete footing or a low wall; a timber fence uses treated or naturally durable wood boards in the same kind of structure.

Composite & timber fencing

Composite fence on a low wall
The classic Costa del Sol villa front: a low wall with pillars, and composite boards filling the bays between them. We build the wall, the pillars and the boards as one job.
View details →Composite fence with posts
A lighter way to build a composite screen: posts set in concrete footings with boards slotted or fixed between them. Ideal for rear gardens and side boundaries where a full wall is more than you need.
View details →
Timber fencing in Málaga
Real wood still has a place on the Costa del Sol – if it is the right timber, treated for its position and built so that water drains away. We build timber fences for owners who want that look and accept its upkeep.
View details →
Composite privacy screens
Sometimes the problem is not the whole boundary but one view: a neighbour's terrace, a window, a path above the garden. A composite privacy screen closes that view with a solid, warm-looking run of boards.
View details →
Vertical composite fencing
Turning the boards upright changes the look and the way a fence is built. Vertical composite fencing gives a contemporary, taller-looking screen and copes well with sloping gardens.
View details →
Composite and timber fence care: building for low upkeep
Most fence maintenance is decided on the day the fence is built. This page explains what composite and timber really need in the Málaga climate, and the design choices we make so that you spend less time on upkeep.
View details →What exactly do we build?
In short: we build the whole composite or timber fence – setting out, footings, low wall if needed, posts or pillars and the boards – not just the panels on top.
A composite fence looks simple from the street: a run of warm-coloured boards between posts. What decides whether it stays straight and quiet for years is everything you do not see – where the line runs, how the footings are made, whether the posts are plumb, and how the boards are allowed to move in the heat. That is the part of the job we take responsibility for.
We are a fencing contractor, not a manufacturer or a shop. We buy boards, posts and fixings from manufacturers and suppliers, or we can work with material you have already bought, and we build the fence on your plot from groundwork to the last cap. We build the whole fence – groundwork, wall, posts and panels.
In practice our work covers:
- setting out the line on site (what Spanish builders call *replanteo*) and agreeing it with you before anything is dug
- excavation and concrete footings for posts or for a low wall
- a low wall (*murete*) in block, rendered or left fair-faced, when the design calls for one
- posts or pillars, then the composite or timber boards and the trims
- removal of an old fence and clearing of the fence line when it is part of the new job
- leaving the site clean at handover
Which composite and timber fence variants do we build?
In short: six main variants – composite on a low wall, composite on posts, timber, composite privacy screens, vertical composite and low-upkeep designs – each with its own page.
Most plots on the Costa del Sol fit one of a handful of designs. Each has a page that explains where it works, where it does not, and how we build it:
- Composite fence on a low wall – boards between rendered or block pillars on a *murete*, the classic villa and townhouse front.
- Composite fence with posts – boards between metal or composite posts set in concrete footings, for rear gardens and side boundaries.
- Timber fencing – treated softwood or durable hardwood boards, for owners who want real wood and accept its upkeep.
- Composite privacy screens – closed board runs placed where you need privacy: terraces, seating areas, a neighbour's window.
- Vertical composite fencing – boards fixed upright to horizontal rails, a more contemporary look that also suits stepped ground.
- Composite and timber care – how to choose and build a fence so that the upkeep matches the time you actually spend here.
If you are still deciding between materials such as aluminium, block or mesh, the general chooser on vallasmalaga.eu compares all of them.
Who are composite and timber fences for?
In short: mainly villa and townhouse owners who want privacy, a warm look and a contained garden, including owners who live abroad for much of the year.
The typical enquiry comes from an owner who wants the garden to feel private again – a new build overlooked by the next terrace, a pool area visible from the road, a dog that has learned to squeeze through the old hedge. Composite boards give a closed, warm-looking screen without the painting cycle of traditional timber, which is why they are popular with people who are not here every month.
We also work for:
- owners living abroad, who need the job organised remotely with clear photo updates
- comunidades de propietarios (owners' associations) replacing a run of fence on shared ground, once the community has approved the design
- holiday-let owners who want a tidy, durable boundary that does not need attention between guests
- small businesses such as restaurants or offices that need a screened outdoor area
Composite is not right for every plot. On a long rural boundary or a large finca, mesh or game fencing is usually more sensible; see mallacinegeticamalaga.eu for that kind of work. Our article on who composite fencing is for goes through the borderline cases honestly.
How we work
- Photos or site visit
You send photos and the approximate length, or we visit. We identify the right variant and anything that needs checking on site.
- Measuring and setting out
We measure in linear metres, confirm the line and the levels, and agree the exact position of the fence with you.
- Itemised quote
You receive a quote broken down by item – groundwork, footings, wall, posts, boards, trims, removal and cleaning – with no commitment.
- Groundwork and footings
We excavate, remove any old fence included in the job, and pour footings or build the low wall.
- Posts and boards
We set posts or pillars plumb and in line, then fit the composite or timber boards with the gaps the system requires.
- Trims and finishing
Caps, end trims and finishing details are fitted and fixings are checked along the whole run.
- Cleaning and handover
We clean the site, take away our waste and hand over the fence, with photos for owners who are not on site.
How do we work, from first photo to handover?
In short: photos or a visit, measuring and setting out, an itemised quote, footings, assembly, then cleaning and handover.
Every job follows the same order, because skipping a step is where most fence problems start.
First we look at the plot, either on a visit or from your photos and an approximate length in linear metres. Not in Spain? Send photos and the approximate length – we can start with a remote assessment. From that we can usually tell you which variant fits and what we still need to check.
Next comes measuring and setting out. We confirm the line, the levels, the access for materials and anything buried or in the way. Then you receive a quote broken down line by line, so you can see what each part of the job is.
Once you accept, we prepare the ground, make the footings or the low wall, set the posts or pillars, fit the boards and trims, and clean up. Owners abroad receive photos at the key stages so they can see the work before it is covered. Our article on what owners wish they had known covers the practical side.
What affects the cost of a composite fence?
In short: length, height, board type, whether there is a low wall, the footings, the ground and access, and any old fence to remove – we price each one separately.
We do not publish prices, because two fences of the same length can be very different jobs. What we can tell you is what moves the figure:
- linear metres and the height of the fence
- the board system – solid or hollow composite, timber species and treatment, horizontal or vertical layout
- a low wall or not, and how it is finished
- the type and depth of footings the ground needs
- slope and changes of level along the line
- access for materials and machinery, stairs, narrow side passages
- removing an old fence and clearing the line
- whether a municipal licence or *declaración responsable* is needed
For a deeper look at quotes and cost factors across all fence types, our sister site presupuestovalla.eu is dedicated to that, and our own composite fence cost guide explains the factors that are specific to composite and timber.
Why do we only give itemised quotes?
In short: a line-by-line quote shows exactly what is included, makes quotes comparable and avoids surprises once the work starts.
A single figure for "supply and fit fence" tells you very little. It does not say whether the footings are included, how the boards are fixed, what happens to the old fence, or who takes the waste away. When two quotes differ, you cannot see why.
Our quotes are broken down into items: setting out, excavation, footings, low wall, posts or pillars, boards, trims and caps, removal of the old fence, clearing and cleaning. Itemised quote, no hidden extras. If something is uncertain – for example what lies under an old concrete strip – we say so in the quote rather than discovering it later.
This also helps owners who are comparing a composite fence with an aluminium one or a rendered wall: with every part listed, it is easy to see where the difference really lies. The guide on comparing quotes shows what to look for.
Do you need permission for a new fence?
In short: usually some form of municipal authorisation is required, and urbanisation rules may add their own conditions – check both before ordering.
In Andalusia, works on private land are governed by the regional planning law and by each town's own planning rules (the *PGOU* and its *ordenanzas*). Depending on the town and on the work, a fence may need a licence from the *ayuntamiento* or a simpler *declaración responsable*. Many urbanisations also have their own rules on height, colour and materials, and some require the community's approval before work starts.
We do not handle permits, but we will tell you what information the town hall normally asks for and give you the measurements and description of the fence for your application. The general fence permit guide on our main site explains the process, and our guide on what composite fencing is helps you describe the material correctly.
How do composite and timber cope with the Málaga climate?
In short: strong sun, salty air near the coast and occasional heavy rain all matter, so material choice and detailing count as much as the boards themselves.
The Costa del Sol is kind to people and hard on materials. Composite boards tend to lighten over time in strong sunlight, and they expand and contract with heat, so the fixing system has to leave room for movement. Timber dries, splits and greys if it is not maintained, and any part that touches soil needs the right level of treatment.
We deal with this in the design: board colours that age gracefully, gaps where the manufacturer specifies them, posts that keep timber out of standing water, and footings that drain. Our guides on composite in strong sun, expansion gaps and pressure-treated timber explain the reasons in more detail.

Where in Málaga province do we work?
In short: across the province, with dedicated pages for the coastal towns where composite fencing is most common.
We work throughout Málaga province. The areas we are asked about most often for composite and timber fences have their own pages, covering the typical plots and what to check locally:
If your town is not listed, send us photos anyway. The process is the same everywhere; only the local rules change.
Where can you read more before deciding?
In short: our guides explain the material and the rules, and our blog answers the practical questions owners ask before ordering.
Good decisions on fencing come from understanding a few things that brochures skip. A selection to start with:
- Timber or composite fence? – an honest comparison for Málaga conditions
- Composite on a wall or on posts? – the structural choice that matters most
- Is a composite fence worth it? – where it pays off and where it does not
- Cleaning and stains – how to look after the boards
- Sustainability claims explained – what labels on composite and timber really mean
- Composite fences with dogs and children – a practical look at families' needs
All guides are listed on the guides page and all articles on the blog.
Where we work
Málaga province: coast, inland towns and fincas.

Composite and timber fencing in Fuengirola
Fuengirola is a compact coastal town where gardens are often small, close to neighbours and overlooked. We build composite and timber fences there that add privacy without taking up space.
View details →
Composite and timber fencing in Benalmádena
Benalmádena runs from the seafront up into the hills, so fencing here ranges from coastal townhouse gardens to sloping villa plots with views. We build composite and timber fences for both.
View details →
Composite and timber fencing in Torremolinos
In Torremolinos many homes are holiday properties or lets, close to busy streets and neighbours. We build composite and timber fences there that give privacy and stay tidy with little attention.
View details →
Composite and timber fencing in Rincón de la Victoria
Rincón de la Victoria lies on the coast east of Málaga city, and many of its homes have gardens used by families. We build composite and timber fences there that keep dogs and children in and neighbours' views out.
View details →
Composite and timber fencing in Mijas
Mijas covers a wide area, from coastal urbanisations to hillside villas. We build composite and timber fences across the municipality, adapting the design to each plot and community.
View details →
Composite and timber fencing in Algarrobo
Algarrobo, in the Axarquía east of Málaga, stretches from the coast into the hills. That means fencing anything from a coastal garden to a country house plot – and composite or timber is not always the answer for every boundary.
View details →Articles and guides

What is composite fencing?
Composite fencing is everywhere on new developments along the coast, but few brochures explain what the boards actually are. This guide does, in plain English, with sources.
View details →
Pressure-treated timber for fences
"Treated timber" is not one thing. Wood for a fence board above ground and wood for a post set in soil need different levels of protection. This guide explains the difference and what to ask.
View details →
Expansion gaps in composite fences
Composite boards grow and shrink with temperature. On a hot Costa del Sol afternoon that movement is real, and a fence built without room for it will show it. Here is why gaps matter.
View details →What does a composite fence cost in Málaga in 2026?
Everyone asks for a price per metre, and every honest contractor answers "it depends". This article explains exactly what it depends on, so you can understand any quote you receive.
View details →
Is a composite fence worth it?
Composite is not the cheapest fence and not the right fence for every plot. But for a certain kind of owner and garden it makes a lot of sense. Here is how to tell which side you are on.
View details →
Common mistakes when choosing composite fencing
Most disappointing composite fences were chosen badly rather than built badly. These are the decisions we see go wrong most often – and what to do instead.
View details →Our specialist sites by fence type
Each fence type has its own site with guides and construction details.

Fencing & boundary walls
Fencing contractor in Málaga province: fence types, permits and areas.
View details →
Block / split-face wall / concrete panels
Block walls, split-face block, rendered walls and precast concrete panel fences on a low wall.
View details →
Aluminium or steel slats
Aluminium slat fences, steel slats, profiled sheet and louvred panels.
View details →
2D/3D mesh panels or sheet
2D and 3D welded mesh panels, warehouse and plot fencing, metal sheet fences.
View details →
Chain link
Galvanised or plastic-coated chain link for plots, vegetable gardens and country houses.
View details →
Game / livestock fencing
Game, livestock and knotted field fencing, finca boundaries, clearing and setting out.
View details →
Fence quote
What drives the cost of a fence and what an itemised quote should include.
View details →Fence cost calculator
Get a rough estimate by linear metre. The final quote is itemised after we see the site.
Frequently asked questions
What is a composite fence made of?
Composite fence boards are made of wood-plastic composite, a mix of wood fibre or flour and a thermoplastic such as polyethylene, plus additives. The exact recipe varies by manufacturer, so we always check the product data sheet for the boards we fit.
Do you manufacture or sell composite boards?
No. We are a fencing contractor: we buy materials from manufacturers and suppliers and build the fence. We can also install material that you have bought yourself, as long as it is suitable for the job.
Can you give me a price per metre?
We do not publish prices because the cost depends on factors such as height, footings, a low wall, access and the ground. Send photos and the approximate length and we will prepare an itemised quote with no commitment.
I live abroad. Can you organise the job without me being here?
Yes. We can start from your photos and the approximate length, agree the details by WhatsApp or e-mail, and send you photos at the key stages of the work. Someone will need to give us access to the plot.
Do you build the low wall as well as the fence?
Yes. When the design needs a *murete*, we build it as part of the same job, along with the pillars, so one team is responsible for the whole structure.
Do you remove the old fence?
Yes, when it is part of a new fence job. Removal of the old fence and clearing of the line are listed as separate items in the quote.
Is composite really maintenance-free?
No material is maintenance-free. Composite needs far less work than timber – no sanding or oiling – but it still needs occasional cleaning, and it can show mould or stains in damp, shaded spots.
Will a composite fence fade in the sun?
Most composite boards lighten over time when exposed to sunlight; research by the US Forest Products Laboratory describes this tendency. Capped or co-extruded boards are designed to slow it down, so the board type matters.
Is timber or composite better for a coastal garden?
Both can work. Composite asks for less upkeep; timber looks more natural but needs regular treatment and correctly protected posts. Our timber versus composite article compares them in detail.
Do I need a permit for a composite fence?
Usually some form of authorisation from the ayuntamiento is required, either a licence or a declaración responsable, depending on the town and the work. Urbanisations can add their own rules, so check both before ordering.
Do you handle the permit application?
No, we do not handle permits. We can give you the measurements and a description of the fence for your application, and tell you what the town hall usually asks for.
Can a composite fence stop my dog getting out?
A closed composite run can contain most dogs well, provided the base is closed and the height suits the dog. Dogs that dig need a solid base, which is one reason many owners choose a low wall.
Can you build on a sloping plot?
Yes. On slopes we either step the fence in level sections or build a low wall that follows the ground, and vertical boards can make stepping easier. The choice depends on the gradient and the look you want.
Can you fit composite boards on my existing wall?
Often, but only after we have checked that the wall and its pillars are sound enough to take the extra load and wind on the boards. If the wall is cracked or leaning, we will tell you before quoting the boards.
Is a fence on a wall the same as a retaining wall?
No. A fence and its low wall are not designed to hold back soil. If your plot needs a retaining wall, that requires a technician such as an arquitecto, aparejador or ingeniero, and we do not build retaining walls.
Do you build gates in composite?
We do not offer gates or automation. We build the fence runs and can leave the opening prepared for a gate supplied and fitted by a specialist.
Which areas do you cover?
We work across Málaga province. Our area pages cover Fuengirola, Benalmádena, Torremolinos, Rincón de la Victoria, Mijas and Algarrobo, but the process is the same in other towns.
What do I need to send for a first assessment?
Photos of the whole line, close-ups of the ground and any existing wall, and the approximate length in linear metres. A note about height, pets and any community rules helps too.
Can I choose the colour of the boards?
Yes, within the range of the board system chosen. Bear in mind that urbanisations sometimes restrict colours, and that darker boards get hotter in direct sun.
How do I contact you?
Call or WhatsApp 613 656 443, write to oficina@vallascompositemalaga.eu, or use the contact form. Photos via WhatsApp are the quickest way to start.
Request your itemised quote
Send us photos and the approximate length in metres. We'll reply with a first assessment, no obligation – even if you're not in Spain.