Vallas Composite MálagaComposite & timber fencing
Brown composite slat fence on a rendered wall
Material guide

What is composite fencing?

Composite fencing is everywhere on new developments along the coast, but few brochures explain what the boards actually are. This guide does, in plain English, with sources.

Technical guidesLast reviewed: Bauman Raymond Attila

What is wood-plastic composite?

In short: a material made by combining wood fibre or flour with a thermoplastic, plus additives, and shaping it into boards.

Wood-plastic composite – usually shortened to WPC – is a family of materials rather than one product. The US Forest Products Laboratory, in its handbook chapter on wood thermoplastic composites, describes the term as covering composites that contain wood in any form combined with plastics that can be repeatedly melted.

The same source lists the main plastics used: polyethylene is the dominant resin in North America, with polypropylene and PVC also used. Manufacturers add other ingredients – pigments, UV stabilisers, lubricants, sometimes biocides – to control colour, processing and durability. The exact recipe varies from brand to brand and is rarely published in full.

For fencing, the mixture is usually extruded into long boards with a profile designed to slot into posts or to be fixed to rails. What you see on a fence like the one in our composite fence on a low wall page is the end of that process.

Dark brown horizontal slats with cream split-face pillars along a pavement
Dark brown horizontal slats with cream split-face pillars along a pavement

What types of composite boards exist?

In short: solid or hollow, and uncapped or capped (co-extruded) – the combination affects strength, weight and how the surface ages.

Two distinctions matter most when choosing boards:

  • Solid or hollow: hollow boards have internal chambers that make them lighter and use less material; solid boards are heavier and generally stiffer. Fence systems are designed around one or the other, so the post spacing and fixing method follow the board.
  • Uncapped or capped: an uncapped board is the same mixture all the way through. A capped – or co-extruded – board has an outer shell of a more resistant plastic layer. The Forest Products Laboratory notes that manufacturers may co-extrude a UV-stable plastic layer to address colour change.

Surface textures vary too: brushed, wood-grain embossed or smooth. Texture changes how the board looks and how easily dirt is cleaned off.

How does composite behave outdoors?

In short: it absorbs less water than wood, tends to lighten in sun, can grow mould in damp spots and expands with heat.

The research summarised by the Forest Products Laboratory gives a clear picture:

  • Moisture: composites absorb less moisture, and more slowly, than solid wood – but they do absorb some, and more wood content means more uptake.
  • Sunlight: most WPCs tend to lighten over time; manufacturers address this with pigments or a co-extruded cap.
  • Mould: outdoor tests show composites are subject to mould growth.
  • Heat: plastics expand when heated, and adding wood reduces – but does not remove – that expansion.

In Málaga, where sun and heat are the dominant stresses, the last two points shape how we build: the boards need room to move, and the base needs to stay dry. Our guides on expansion gaps and composite in strong sun cover them.

How does composite compare with timber and aluminium?

In short: less upkeep than timber, a warmer look than aluminium, but heavier and more affected by heat than either.

Against timber, composite needs no staining or oiling and does not rot in the same way, but it cannot be sanded back and refinished, and it looks more uniform. Our article timber or composite fence? compares them for local conditions.

Against aluminium slats, composite looks warmer and more like wood, but it is heavier, moves more with temperature and relies more on its post system. If you are weighing those two, our sister site vallasaluminiomalaga.eu explains wood-effect aluminium.

How should you describe composite in a permit or community request?

In short: by what it is – boards of wood-plastic composite between posts or pillars – with height, length and colour.

Town halls and community boards are used to walls, mesh and timber; "composite" may mean nothing to them. A clear description helps: the type of structure (low wall with pillars, or posts in footings), the board material (wood-plastic composite), the colour, the height and the length. We provide that description and the measurements for your application, although we do not handle the permit itself. The general permit process is explained on vallasmalaga.eu.

What should you look for on a product data sheet?

In short: board type, recommended post spacing, fixing method, movement gaps, care instructions and what the manufacturer says about fading.

Before we fit any board, we read its installation instructions. As an owner, a few points on the data sheet tell you a lot:

  • whether the board is solid or hollow, capped or uncapped
  • the post or rail spacing the system is designed for
  • the fixing method and the movement gaps required
  • cleaning instructions, including whether pressure washers are allowed
  • the manufacturer's statements on colour change

If a supplier cannot provide installation instructions, that is a warning sign. See also composite and timber care.

Official sources

BR
Bauman Raymond Attila
Author and person responsible · Last reviewed:
FAQ

Frequently asked questions

What does WPC stand for?

Wood-plastic composite. It is a family of materials combining wood fibre or flour with a thermoplastic and additives.

Which plastic is in composite boards?

Commonly polyethylene, with polypropylene and PVC also used, according to the US Forest Products Laboratory. Each manufacturer's recipe differs.

Is composite the same as plastic fencing?

No. Pure plastic fencing contains no wood. Composite contains wood fibre, which reduces thermal expansion compared with unfilled plastic.

Does composite rot?

It does not rot like solid timber, but it absorbs some moisture and can grow mould on the surface in damp conditions.

What is a capped composite board?

A board with a co-extruded outer layer of more resistant plastic, designed among other things to reduce colour change.

Are hollow boards weaker?

They are lighter and generally less stiff than solid boards, but a fence system is designed around its board. Problems arise when boards and posts from different systems are mixed.

Does composite get hot?

Like most materials in direct sun, yes, and darker colours absorb more heat. Check the manufacturer's information if the fence will be touched often.

Can composite be recycled?

Some manufacturers run take-back or recycling schemes; others do not. Ask for specific, verifiable information rather than general claims.

Can you paint composite?

Most manufacturers do not recommend painting. The colour is in the material or the cap, and paint may not bond well.

Do you sell composite boards?

No. We are a fencing contractor and buy from manufacturers and suppliers for the fences we build, or install boards supplied by the client.

Get a quote

Planning a composite or timber fence?

Send photos and the approximate length by WhatsApp or the form. We reply with what to check and an itemised quote, no commitment.