
Timber fencing in Málaga
Real wood still has a place on the Costa del Sol – if it is the right timber, treated for its position and built so that water drains away. We build timber fences for owners who want that look and accept its upkeep.
A timber fence is a fence whose boards, and often posts, are made of wood – usually pressure-treated softwood or a naturally durable species – fixed to posts or rails set in footings or on a low wall.
What counts as a timber fence today?
In short: a fence built from treated or naturally durable wood, usually as horizontal or vertical boards on posts or on a low wall.
The timber fences we build are mostly slatted screens: horizontal boards with narrow gaps, fixed to posts or between pillars, stained in a dark or natural tone. Close-boarded fences and vertical board designs are also possible.
The timber itself is the key decision. Most outdoor fencing uses softwood that has been impregnated with preservative under pressure, sold for a specific *use class* – the level of exposure it is meant for. Some hardwoods are naturally durable enough for outdoor use without treatment. The difference between above-ground and ground-contact timber matters a great deal, and our guide on pressure-treated timber explains it.

Why choose timber instead of composite?
In short: for its natural look, feel and repairability – accepting that it needs regular treatment in Málaga's sun.
Owners choose timber because it looks and feels like wood, because individual boards can be sanded, re-stained or replaced, and because it suits rustic houses, country plots and gardens full of planting.
The trade-off is upkeep. In strong sun untreated wood turns grey, dries and develops surface cracks; stains and oils need renewing regularly to keep the colour. Composite avoids most of that work but looks more uniform and cannot be refinished in the same way.
We compare the two in detail in timber or composite fence?. If you like the look of wood but not the maintenance, also consider composite on a low wall in a wood-effect colour.
How do we protect posts from rot?
In short: by choosing ground-contact timber or metal posts and by keeping water from sitting around the base.
Timber fences rarely fail at the boards; they fail where the post meets the ground. Wood that stays wet near the soil is where decay starts. We reduce that risk in several ways:
- posts rated for ground contact when they go into the soil, or metal post supports so the timber stays above ground
- footings shaped so rainwater runs away from the post
- a gap between the bottom board and the soil or wall top
- cut ends treated on site, because cutting exposes untreated wood inside the board
On a low wall the timber stays out of the soil altogether, which is why many timber fences here are built that way.

What should you check first?
In short: the boundary, the town's rules, your community's design rules and how much upkeep you are really willing to do.
- Boundary: confirm the *lindero* and, on a shared line, agree the position with your neighbour.
- Rules: the *ayuntamiento* decides the authorisation; some urbanisations specify colour or prefer certain materials on the street side.
- Upkeep: be honest about how often you will be here to treat the wood. If you are away most of the year, timber may not be the right choice.
- Sustainability: if certified timber matters to you, ask for the certificate details. Our guide on sustainability claims shows how to check them.
How do you maintain a timber fence here?
In short: clean it, re-stain or oil it regularly, and deal quickly with loose fixings and damaged boards.
Plan on periodic cleaning and re-coating with a product suitable for the timber and its existing finish – the coating manufacturer's instructions set how often. South- and west-facing sides weather faster. Check screws and nails, because wood moves with changes in moisture and fixings can loosen.
Our composite and timber care page gives a realistic picture of upkeep for both materials.
What affects the cost?
In short: species and treatment, board layout, posts or wall, the ground, access and finishing – each one shown separately.
Timber fences vary a lot. Treated softwood and durable hardwood are very different materials; close-boarded and slatted designs use different amounts of timber; a factory-applied finish saves work later. Posts set in the ground, posts on metal supports and boards between masonry pillars are all different jobs.
We list the factors below. For how fence quotes are built in general, visit presupuestovalla.eu.
How we build it – step by step
- Setting out
We mark the line and post positions, agree heights and check the levels along the boundary.
- Excavation
We dig footings or prepare the wall top, and remove any old fence included in the job.
- Posts
We set ground-contact posts or metal post supports in concrete, plumb and aligned.
- Rails or brackets
We fix the rails or brackets that will carry the boards, keeping water traps to a minimum.
- Boards
We fix the boards with exterior-grade fixings and even gaps, treating every cut end.
- Finishing
We apply or touch up the agreed stain or oil where the job includes it, and fit caps.
- Cleaning and handover
We clean the site and explain the upkeep the fence will need.
When is it the right choice – and when not?
A good fit if…
- Owners who want the look and feel of real wood
- Rustic houses, country plots and planted gardens
- People who are on site often enough to maintain it
- Fences on a low wall, where timber stays dry
Consider another option if…
- Owners abroad who want minimal upkeep
- Boundaries constantly wet from irrigation
- Urbanisations that do not allow timber on the street side
- Anyone expecting wood to keep its colour without treatment
What affects the cost?
We don't publish fixed prices: every fence is quoted line by line using these factors.
- Linear metres and height
- Timber species and treatment class
- Board layout: slatted, close-boarded, horizontal or vertical
- Posts in the ground, on supports or masonry pillars
- Footings and ground conditions
- Factory or on-site finish
- Slope and access
- Removal of an old fence and clearing
- Licence or declaración responsable, if required
Articles and guides

Pressure-treated timber for fences
"Treated timber" is not one thing. Wood for a fence board above ground and wood for a post set in soil need different levels of protection. This guide explains the difference and what to ask.
View details →
Timber or composite fence: which suits your garden?
We build both, so we have no reason to push either. The right choice depends less on the material than on how you use the garden and how much time you spend here.
View details →
Composite and timber fence care: building for low upkeep
Most fence maintenance is decided on the day the fence is built. This page explains what composite and timber really need in the Málaga climate, and the design choices we make so that you spend less time on upkeep.
View details →
Composite fence on a low wall
The classic Costa del Sol villa front: a low wall with pillars, and composite boards filling the bays between them. We build the wall, the pillars and the boards as one job.
View details →Frequently asked questions
Which timber do you use?
Usually pressure-treated softwood rated for its exposure, or a naturally durable species when the client prefers it. We choose with you, based on budget, look and how much upkeep you accept.
Does treated timber need painting?
Treatment protects against decay, not against the sun. To keep the colour and limit cracking, timber needs a stain or oil, renewed according to the product's instructions.
Why does wood turn grey?
Sunlight breaks down the surface of untreated or uncoated wood, which then weathers to grey. It is mostly a surface change, but it is a sign that the finish needs renewing.
Can timber posts go straight into the ground?
Only if they are rated for ground contact. Otherwise we use metal post supports so that the timber stays above the soil.
Is timber more sustainable than composite?
It can be, depending on where the wood comes from and how it is treated. If that matters to you, ask for verifiable certificate details rather than general claims.
Can you build a timber fence on my wall?
Yes, if the wall and pillars are sound. Timber on a wall stays drier than timber near soil, which helps it last.
Will a timber fence warp?
Wood moves as it dries and gets wet. Good fixing, even gaps and the right board size limit warping, but some movement is normal.
Can you re-stain my existing fence?
We build new fences and do not offer maintenance as a separate service. We can advise on what your fence needs.
Is timber suitable near the sea?
Yes, with the right treatment, stainless or suitably protected fixings and regular upkeep. Salt and sun make maintenance more important.
How do I get a quote?
Send photos of the boundary and the approximate length, and tell us the look you want. We will prepare an itemised quote with no commitment.
Planning a composite or timber fence?
Send photos and the approximate length by WhatsApp or the form. We reply with what to check and an itemised quote, no commitment.