
Composite and timber fence care: building for low upkeep
Most fence maintenance is decided on the day the fence is built. This page explains what composite and timber really need in the Málaga climate, and the design choices we make so that you spend less time on upkeep.
Composite and timber fence care is the routine of cleaning, inspection and – for timber – re-coating that keeps a board fence sound and good-looking; a low-upkeep fence is one designed and built so that this routine stays as light as possible.
What upkeep do composite and timber really need?
In short: composite needs occasional cleaning; timber needs cleaning plus regular re-coating – neither is maintenance-free.
The phrase "maintenance-free" does the composite industry no favours. Composite boards need no sanding, staining or oiling, which is a big difference from timber. But they still collect dust, pollen, leaf stains and – in damp, shaded spots – mould, and research by the US Forest Products Laboratory notes that most composites lighten over time outdoors.
Timber needs everything composite needs, plus periodic re-coating with a stain or oil to protect the surface from sun and water. How often depends on the product and the exposure; south- and west-facing sides need it most.
Our composite fence on a low wall and timber fencing pages describe each design in full.

Which design choices reduce upkeep the most?
In short: keeping boards off the soil, letting water drain, choosing a sensible colour and leaving room for movement.
The fences that need least attention share a few features:
- A dry base: a low wall, a base board or a gap keeps the lowest board out of soil, mulch and sprinkler spray.
- Drainage: footings and wall tops shaped so that water runs off rather than pooling against posts.
- Colour: mid tones hide dust and fading better than very dark or very light boards.
- Movement gaps: boards fixed according to the manufacturer's instructions do not bind, bow or crack.
- Caps on everything: post caps, end trims and wall copings keep water and dirt out of channels and cut ends.
These are built in at the start, which is why we discuss upkeep before we quote. Our guide on expansion gaps explains the movement point in detail.
What if you are away most of the year?
In short: choose composite over timber, design for a dry base and arrange for someone to wash the fence occasionally.
For owners who live abroad, the honest advice is that composite on a low wall or on a base board is the lowest-effort combination we build. Timber can work if a gardener or property manager will re-coat it on schedule; if nobody will, it will grey and dry out between visits.
It also helps to agree a simple check with whoever looks after the house: a wash before the summer season, a look for loose caps or boards after storms, and keeping irrigation pointed away from the fence. We do not offer maintenance contracts, but we explain at handover what to watch for.
Our article on what owners wish they had known collects practical lessons on this.
How should you clean composite and timber?
In short: gently, with water and a mild cleaner, following the board or coating manufacturer's instructions.
For composite, a soft brush, water and a mild detergent deal with most dirt. Stains from leaves, rust or grease need specific treatment, and aggressive cleaners or high pressure close to the surface can damage some boards – always check the manufacturer's care instructions first.
For timber, cleaning before re-coating is part of the job: dirt and grey fibres should come off so the new coat bonds. Our guide on cleaning and stains goes into detail, including what not to do.
When does a fence need professional attention?
In short: when posts lean, boards bow or crack along their length, or a wall under the fence cracks.
Some changes are normal: slight colour change, small movement at board ends, surface checking on timber. Others are signs of a structural problem:
- a post or pillar leaning or moving when pushed
- boards bowing out of their channels or cracking along their length
- cracks in the low wall or pillars
- soft, crumbling timber at the base of posts
When we see these on an existing fence, it usually makes more sense to rebuild the affected section properly than to patch it. If a new fence is the answer, see our composite fence with posts page.
Does a low-upkeep design cost more?
In short: sometimes at the start – a wall, base board or capped boards add items – but each is visible in the itemised quote.
The choices that reduce upkeep tend to add items to the build: a low wall instead of posts in the soil, capped or co-extruded boards, more caps and trims. In the quote each appears as its own line, so you can decide which ones matter to you. For general guidance on how fence quotes are built, see presupuestovalla.eu.
Official sources
How we build it – step by step
- Upkeep conversation
Before quoting, we ask how often you are here and who looks after the house, because that shapes the design.
- Setting out
We mark the line, levels and posts, and plan where water will run.
- Dry base
We build a low wall, base board or footing detail that keeps the boards clear of soil and spray.
- Posts and structure
We set posts or pillars plumb, with drainage around their bases.
- Boards and gaps
We fit composite or timber boards with the movement gaps and fixings the manufacturer specifies.
- Caps and trims
We cap posts, channels and cut ends so that water and dirt stay out.
- Handover with care notes
We hand over the fence and explain what to clean, what to check and when.
When is it the right choice – and when not?
A good fit if…
- Owners abroad and holiday-let owners
- Anyone who wants a composite fence with minimal work
- Gardens with irrigation near the boundary
- Owners replacing a timber fence that wore out quickly
Consider another option if…
- Anyone expecting a fence that never needs cleaning
- Owners who want timber but cannot arrange re-coating
- Requests for a maintenance contract, which we do not offer
What affects the cost?
We don't publish fixed prices: every fence is quoted line by line using these factors.
- Choice of composite or timber
- Low wall, base board or posts in the soil
- Capped or uncapped composite boards
- Caps, trims and copings
- Drainage details at footings
- Linear metres, height and access
- Removal of an old fence and clearing
Articles and guides

Cleaning composite and timber fences
Most fence stains on the coast come from the same few sources: trees, irrigation water, metal, barbecues and damp shade. This guide covers how to deal with each without harming the boards.
View details →
Composite fencing in strong sun
Sun is the main stress on any fence along the Costa del Sol. For composite it means colour change, surface heat and movement. Knowing what to expect makes it easier to choose the right board and colour.
View details →
Timber fencing in Málaga
Real wood still has a place on the Costa del Sol – if it is the right timber, treated for its position and built so that water drains away. We build timber fences for owners who want that look and accept its upkeep.
View details →
What owners wish they had known before building a composite fence
No quotes from clients here – just the practical points that come up again and again on composite and timber fence jobs, written as advice so you can use them before you order.
View details →Frequently asked questions
Is composite maintenance-free?
No. It needs no oiling or staining, but it still needs cleaning and can show stains or mould in damp spots. It is low-maintenance, not no-maintenance.
How often should I clean a composite fence?
As often as it looks dirty, and at least before the summer season is a sensible habit. Exposure to trees, dust and irrigation makes the biggest difference.
Can I use a pressure washer?
Some manufacturers allow it with care, others advise against it. Check the care instructions for your boards before using one.
How often does timber need re-coating?
It depends on the coating and the exposure; the product manufacturer gives the interval. Sunny sides need it more often.
Will composite fade?
Most composite boards lighten over time in sunlight. Capped boards are designed to resist this better, so the board type matters.
Why is my fence going mouldy?
Mould grows where the fence stays damp and shaded, often near soil, plants or sprinklers. Keeping the base dry and cleaning regularly helps.
Do you offer maintenance contracts?
No. We build fences and explain at handover what care they need, but we do not offer maintenance as a service.
Can you fix my existing fence?
We focus on new fences. If part of an existing fence is failing structurally, we can quote a properly built replacement section.
Is a dark fence harder to maintain?
Dark boards show dust and fading more, and get hotter in the sun. Mid tones are usually the easiest to live with.
What should my gardener check?
That sprinklers do not wet the fence, that soil and mulch stay off the bottom board, and that caps and boards are secure after storms.
Planning a composite or timber fence?
Send photos and the approximate length by WhatsApp or the form. We reply with what to check and an itemised quote, no commitment.